Showing posts with label Dodge. Show all posts
Showing posts with label Dodge. Show all posts

Friday, February 11, 2011

2012 Dodge Charger SRT8 Breaks Cover at the Chicago Auto Show


Dodge’s rejuvenation under Fiat's umbrella continues at the Chicago Auto Show with the unveiling of the range-topping Charger SRT8. As with every SRT model, the highlight of the performance orientated version of the Charger is the new 6.4-liter HEMI V8 powerplant producing 465HP and 465 lb-ft (631 Nm) of torque. According to Dodge, the new engine is not only more powerful than the 6.1-liter HEMI unit it replaces, but also more frugal thanks the standard Fuel Saver technology, which cuts off four-cylinders in certain situations in order to improve fuel economy.

The HEMI is coupled to a 5-speed automatic transmission that can also be operated via paddle-shifters – a first for any SRT model.

“We’re continuing the fast-paced rebuilding of Dodge as our performance brand, and the expansion of our SRT product lineup in 2012 is an important part of our rejuvenation”, said Ralph Gilles, President and CEO, Dodge Brand — Chrysler Group LLCs. “The new 2012 Dodge Charger SRT8 builds on the iconic four-door fastback coupe design of the all-new Charger and adds a much larger power band across the rpm range, along with intelligent performance attributes and safety and creature comforts for customers who are passionate about performance driving.”

The Charger SRT8 also comes with adaptive damping suspension, which can adapt to specific conditions by monitoring the vehicle speed, steering angle and speed, brake torque, throttle position and lateral acceleration. The refined, fully hydraulic steering system and oversized 4-pot caliper Brembo brakes round up the technical tour de force.

On the outside, the 2012 Charger SRT8 can be recognized due to its exclusive front and rear fascias, complemented by a new rear spoiler, “racetrack” LED tail lamp and split five-spoke, 20-inch lightweight forged and polished aluminum wheels.

Inside, the SRT-exclusive steering wheel with a flattened bottom, carbon and aluminum trim pieces, plus sport seats set this car apart from the standard Charger.

The new Dodge Charger SRT8 will go on sale in the U.S. this fall as a 2012 model.


2012 DODGE CHARGER SRT8

Introduction Date: Fall 2011 as 2012 model

Engine: 6.4-liter (392 cubic inch) HEMI V-8

Estimated Power: 465 bhp

Estimated Torque: 465 lb.-ft.

Estimated Handling: .88g on skidpad

Estimated Top Speed: 175 mph

Estimated 0-60 mph: High 4-second range

Estimated ¼ mile: High 12-second range

2012 Dodge Charger SRT8 Breaks Cover at the Chicago Auto Show


Dodge’s rejuvenation under Fiat's umbrella continues at the Chicago Auto Show with the unveiling of the range-topping Charger SRT8. As with every SRT model, the highlight of the performance orientated version of the Charger is the new 6.4-liter HEMI V8 powerplant producing 465HP and 465 lb-ft (631 Nm) of torque. According to Dodge, the new engine is not only more powerful than the 6.1-liter HEMI unit it replaces, but also more frugal thanks the standard Fuel Saver technology, which cuts off four-cylinders in certain situations in order to improve fuel economy.

The HEMI is coupled to a 5-speed automatic transmission that can also be operated via paddle-shifters – a first for any SRT model.

“We’re continuing the fast-paced rebuilding of Dodge as our performance brand, and the expansion of our SRT product lineup in 2012 is an important part of our rejuvenation”, said Ralph Gilles, President and CEO, Dodge Brand — Chrysler Group LLCs. “The new 2012 Dodge Charger SRT8 builds on the iconic four-door fastback coupe design of the all-new Charger and adds a much larger power band across the rpm range, along with intelligent performance attributes and safety and creature comforts for customers who are passionate about performance driving.”

The Charger SRT8 also comes with adaptive damping suspension, which can adapt to specific conditions by monitoring the vehicle speed, steering angle and speed, brake torque, throttle position and lateral acceleration. The refined, fully hydraulic steering system and oversized 4-pot caliper Brembo brakes round up the technical tour de force.

On the outside, the 2012 Charger SRT8 can be recognized due to its exclusive front and rear fascias, complemented by a new rear spoiler, “racetrack” LED tail lamp and split five-spoke, 20-inch lightweight forged and polished aluminum wheels.

Inside, the SRT-exclusive steering wheel with a flattened bottom, carbon and aluminum trim pieces, plus sport seats set this car apart from the standard Charger.

The new Dodge Charger SRT8 will go on sale in the U.S. this fall as a 2012 model.


2012 DODGE CHARGER SRT8

Introduction Date: Fall 2011 as 2012 model

Engine: 6.4-liter (392 cubic inch) HEMI V-8

Estimated Power: 465 bhp

Estimated Torque: 465 lb.-ft.

Estimated Handling: .88g on skidpad

Estimated Top Speed: 175 mph

Estimated 0-60 mph: High 4-second range

Estimated ¼ mile: High 12-second range

New Dodge Durango Heat gets the R/T’s Goods Sans the V8 Engine

Dodge doubled its new Durango offerings at the Chicago Auto Show with the launch of the Heat performance package that joins the R/T model. The two trim levels share most of their exterior and interior appointments as well as suspension tweaks, but whereas the R/T gets a 360-horsepower 5.7-liter HEMI V8, the Heat is fitted with a 3.6-liter Pentastar V6 delivering 295 ponies and 260 lb.-ft. (353 Nm) of torque for an improved fuel efficiency of 16/23 mpg for the rear-wheel-drive model and 16/22 mpg for the all-wheel-drive version.

From there on, the Durango Heat features the same color-matched bodykit and dual chrome exhaust tips on the outside and decorative trim inside as the R/T. The Heat will come equipped with a Uconnect Voice Command and 506-watt Alpine audio system with 10 speakers, including subwoofer, as standard

The five-passenger Heat also shares R/T’s more aggressive suspension tuning, performance steering, unique 20-inch wheels with all-season performance tires, a 20-mm lower ride height, and tuned exhaust system.

The Durango Heat has a starting U.S. Manufacturer’s Suggested Retail Price of $30,295 (excluding destination charges), which represents a $5,170 saving over the V8-powered R/T.

New Dodge Durango Heat gets the R/T’s Goods Sans the V8 Engine

Dodge doubled its new Durango offerings at the Chicago Auto Show with the launch of the Heat performance package that joins the R/T model. The two trim levels share most of their exterior and interior appointments as well as suspension tweaks, but whereas the R/T gets a 360-horsepower 5.7-liter HEMI V8, the Heat is fitted with a 3.6-liter Pentastar V6 delivering 295 ponies and 260 lb.-ft. (353 Nm) of torque for an improved fuel efficiency of 16/23 mpg for the rear-wheel-drive model and 16/22 mpg for the all-wheel-drive version.

From there on, the Durango Heat features the same color-matched bodykit and dual chrome exhaust tips on the outside and decorative trim inside as the R/T. The Heat will come equipped with a Uconnect Voice Command and 506-watt Alpine audio system with 10 speakers, including subwoofer, as standard

The five-passenger Heat also shares R/T’s more aggressive suspension tuning, performance steering, unique 20-inch wheels with all-season performance tires, a 20-mm lower ride height, and tuned exhaust system.

The Durango Heat has a starting U.S. Manufacturer’s Suggested Retail Price of $30,295 (excluding destination charges), which represents a $5,170 saving over the V8-powered R/T.

Wednesday, February 2, 2011

Dodge Charger RT, 1971

Dodge Charger RT, 1971



In 1971, the all-new third generation Charger debuted. It was completely restyled with a new "Pontiac" grille and more rounded "fuselage" bodystyle. Many people have compared the look of the 1971-1974 Chargers to the 1968-1970 Pontiac GTOs. The interiors now looked more like those of the E-body and were now shared by the Plymouth B-body. A rear spoiler and a "Ramcharger" hood made the option lists for the first time. A special scoop was mounted in the hood, directly above the air cleaner. If the driver wanted to put clean air directly into the carburetor, he pulled a small lever under the dash and the scoop popped up. This gimmicky (but novel) device had been used on the Coronet R/T and Super Bees, but this was the first time it was used on the Charger.

Dodge merged its Coronet and Charger lines. From 1971, all four-door B-bodies were badged as Coronets and all two-door B-bodies as Chargers. This change would add the one-year-only Charger Super Bee to the Charger stable.

The Dodge Super Bee made the move from the Coronet line to the Charger line for 1971 only, then the model was discontinued. Several other models were carried over from 1970, including the 500. However this 500 could be ordered with any engine and was not the high performance model it was in 1969. The R/T and SE versions carried over as well, but the R/T's popularity was on the downslide thanks to higher insurance costs. Only 63 Hemi versions were built, and 2,659 were built with other engines that year.

Rapidly rising insurance rates, combined with higher gasoline prices, reduced sales of muscle cars and 1971 was the last year of availability for the 426 Hemi "Elephant engine" in any car. 1972 also saw the end of the high-performance 440 Six-Pack engine (although a very small number of 1972 Chargers came with this engine). The 1972 Charger bowed with a new "Rallye" option to replace the former R/T version. The 440 engines were still available, but now had to use the net horsepower rating instead of the gross horsepower rating. This would cause their horsepower ratings to go down substantially, although the net horsepower rating was actually more realistic. Also beginning in 1972 (with the exception of the very few 440 Six-Pack engines installed in Chargers early in the model year), all engines featured lowered compression ratios to permit the use of regular leaded or unleaded gasoline rather than leaded premium fuel as in past years due to increasing tighter emissions regulations.

The dozen or so 1972 models were built with the 440 Six-Pack engine, a low-compression 440 with a 4 barrel carburetor became the top dog engine, and the use of the pistol-grip 4-speed Hurst shifter was limited to engines of 400 cubic inches. The 1972-1974 Chargers were no longer called performance cars, but were gradually turned into personal luxury cars, because all manufacturers "saw the handwriting on the wall." The end of the muscle car era came to a close, and the 1975 Dodge Charger would be the final nail in the coffin.

Monday, January 24, 2011

Japanese Students craft a Dodge Ram Truck out of a Mazda MPV


We received some e-mails asking us if the green-colored Ram truck hiding behind the Chrysler-ized Prius 300C we showed you earlier today was a tricked out Dodge, or if, like many other project cars shown at the Tokyo Auto Salon, this too was a replica. The answer is it's a Ram Truck clone based on the Mazda Bongo Friendee, which is a Japanese domestic market MPV with seating for eight, offered between 1995 and 2005. Like the Prius 300C, the Ram Truck Friendee was built by a team of students from the Saitama Institute of Automotive Technology.


Photos: Phil Alex / Carscoop


________________________RAM TRUCK FRIENDEE________________________




_______________________________________________________________________


_______________________MAZDA BONGO FRIENDEE______________________


Sunday, January 16, 2011

Dodge Charger Daytona, 1969

Dodge Charger Daytona, 1969


 
NASCAR in 1969 stipulated that any car raced in their series had to be available for sale and must build a minimum of five hundred for the general public. Since the Charger 500 was not fast enough, Dodge went back into the wind tunnel and created one of the most outrageous and most sought after Chargers, the 1969 Dodge Charger Daytona.

The Daytona used a pointed nose piece that added 18 inches into the front of the car. This gave the car the downforce that the engineers were looking for, but the rear end still tended to lift at speed. To solve this, they mounted a large wing over the trunklid which would give the Charger Daytona and its sister car, the 1970 Plymouth Superbird, the nickname of "wing cars". The wing was 23 inches tall so that the trunk could be open without hitting the bottom of the wing. Slightly modified fenders and a hood from the upcoming 1970 Charger were used on the Daytona. Rear facing scoops were added to the front fenders, right above the tires, which mimicked their NASCAR brothers. But while they looked cool they didn't add any aerodynamic adavantage. They were only used to help with tire rub.

Only 503 Charger Daytonas were built with either 440 Magnum or 426 Hemi power. All Daytonas wore red, black, or white bumble stripes that bore the name "Daytona" in the middle of the stripe. The wings were painted the same color as the stripes. The "wing cars" would prove to be so fast and dominating that NASCAR effectively outlawed them for the 1971 season, as a new regulation was introduced that restricted all "aero" cars to a maximum engine displacement of 5.0 L (305 in³), down from the previous 7.0 L (429 in³).

Dodge Charger, 1969

Dodge Charger, 1969



There have been a number of vehicles bearing the Charger nameplate, but the name has generally denoted a performance model in the Dodge range. The 1966 to 1974 Chargers were the high performance B-body models. The 1975 to 1978 Chargers were based on the Chrysler Cordoba.

1969
In 1969 not much was changed for the popular Charger. Exterior changes included a new grille with a center divider and new longitudual taillights. A new trim line called the Special Edition (SE) was added. This could be available by itself or packaged with the R/T, thus making an R/T-SE. The SE added leather inserts to the front seats only, chrome rocker mouldings, a wood grain steering wheel and wood grain inserts on the instrument panel. A sunroof was added to the option list as well, and it would prove to be a very rare option. The bumble bee stripes returned as well, but were changed slightly. Instead of four stripes it now featured one huge stripe framed by two smaller stripes. In the middle of the stripe an R/T cutout was placed. If the stripe was deleted, then a metal R/T emblem was placed where the R/T cutout was. Total production dropped slightly to around 85,680 units. But in 1969 Dodge had its eye on NASCAR and in order to compete it would have to create two of the most rare and desirable of all Chargers: Charger 500, and the Charger Daytona.

The television series The Dukes of Hazzard (1979-1985) featured a 1969 Dodge Charger R/T that was named The General Lee, often quoted as the most recognizable car in the world. "The General" sported the Confederate flag painted on the roof and the words "GENERAL LEE" over each door. The windows were always open, as the doors were (allegedly) welded shut. The number "01" is painted on both doors. Also, when the horn button was pressed, it played the first 12 notes from the de facto Confederate States anthem "Dixie's Land". The muscle car performed spectacular jumps in almost every episode, and the show's popularity produced a surge of interest in the car. The show itself purchased hundreds of Chargers for stunts, as they generally destroyed at least one car per episode. (Real Chargers stopped being used for jumps at the end of the show's sixth season, and were grudgingly replaced with miniatures.)

Dodge Challenger TA, 1970

Dodge Challenger TA, 1970



The first Challenger was the division's late entrant to the pony car market segment in the United States, launched for the 1970 model year.

It was strongly based on the similar Plymouth Barracuda's new E-body but with two inches (51 mm) of extra wheelbase and somewhat different outer sheetmetal. Exterior design was done by Carl "CAM'" Cameron, whom also did the exterior for the 1966 Dodge Charger. For the 1970 Challenger grille, CAM' based it off of an older sketch of his of a 1966 Charger prototype that was designed to have a turbine engine. The Charger never got the turbine, but the Challenger got that car's grille. Although the Challenger was well-received by the public (with 80,000 sales in 1970 alone), it was criticized by the press, and the pony car segment was already declining by the time the Challenger arrived. Challenger production ceased after the 1974 model year, only having lasted five years; performance dropped off dramatically after the 1971 models. About 165,500 Challengers were sold over this model's lifespan.

Challengers could either be hardtop coupes or convertibles (through 1971 only). The performance model was the R/T (Road/Track), available in both body styles; both standard and R/T hardtops could be ordered as the more luxurious SE specification, which included leather seats, a vinyl roof and a smaller 'formal' rear window. The convertible Challnger was only available as an R/T in 1970. In 1972, Dodge dropped the R/T badging and now called it the "Rallye". Other options, as well as engines and a manual transmission, included steeper rear axle ratios, a limited-slip differential, and a shaker hood scoop were gone for 1972.

A 1970-only model was the Dodge Challenger T/A (Trans Am) racing homologation car, which used a specially tuned Six-Pack version of the 340 in³ (5.6 L) engine, topped with a giant hood scoop on a fiberglass hood. 'Megaphone' exhaust outlets were fitted in front of the rear wheels. These cars came standard with front and rear sway bars to enhance handling. Unusually, different-sized wheels were fitted front and back, with very fat rubber on the rear. The T/A also came with a rear ducktail spoiler and front ground effect spoilers as standard equipment.

By 1972, all big-block engines were gone, maximum power was down to 240 hp, and production ceased in mid-1974.

Although the body style remained the same throughout the 5 year run, there were two notable changes to the front grille. 1971 models had a more stylized "split" grille, and the final manipulation coming in 1972, with the incorporation of the "sad-mouth" design. With this change to the front end, 1972 through 1974 models had little to no variation. The only way to properly distinguish said models is by the front and rear "bumperettes" which exponentially increased in size during each consecutive year. These changes were made to meet US regulations regarding crash test safety.

The 1970 taillights went all the way across the back of the car, with the backup light in the middle of the rear. In 1971, the backup lights were on the left and right instead of the middle. The taillight array also changed for 1972 onwards, with the Challenger now having four individual lamps similar to the mid-size Mercurys of the time.

Collector's value
As the Chrysler E-body line reaches legendary proportions, so too do the prices to buy them. 1970 and 1971 models tend to generate more attention from potential (and usually deep pocketed) buyers, as the performance and style options had not yet been toned down. However, with the popularity of these vehicles on the increase, coupled with the number of useable and restorable Challengers being on the decrease, many collectors have begun looking towards the later models to create their own customizable dream machines. Indeed, many "clones" of the more visceral 1970 and 1971 Challengers have been created by using 1972 through 1974 donors; The front and rear grilles/bumpers on these vehicles are easily interchangeable. However, the tail panel is not so easy to change, since the 1970 and 1971 tail panels are quite different from the 1972 to 1974 models.

Friday, January 14, 2011

Dodge Says Next Viper's Looks to be Inspired by “a Naked Woman on the Beach”


Speaking at the Automotive News World Congress in Detroit, the head of Chrysler design boss and head of the Dodge brand, Ralph Gilles, told reporters today that the next generation of the Dodge Viper is going to be “drop-dead beautiful” sporting a look inspired by “a naked woman on the beach”.

With sales of the previous generation steadily declining over the years (only 392 were sold in 2010, when production ceased), a totally redesigned Viper could be just what the doctor ordered for Dodge.

As previously reported, the new model won’t be based on the Alfa Romeo 8C Competizione, as some sources suggested, while Gilles also clarified that it’s not going to have Ferrari powerplants either. The Dodge boss was also confident regarding the cost-effectiveness of the Viper, stating that it will be profitable.

The 2013MY Dodge Viper is scheduled to make world premiere next year.

By Csaba Daradics

Source: Automotive News



_______________________________GALLERY_______________________________


Wednesday, January 5, 2011

America's Top 10 Selling Vehicles in 2010


The U.S. auto sales numbers for 2010 are out and once again, Ford's F-Series pickup truck has been crowned the best-selling vehicle of the year, a title which it has held for 34 years in a row. According to Autodata Corp., the Dearborn-based brand moved 528,349 units of its F-150 light-duty and F-250, F-350 and F-450 heavy-duty trucks in 2010, recording an impressive increase of 27,7 per cent over 2009.

The Chevrolet Silverado took second place with 370,135 units, or some 158,000 less than the F-Series. Sales of GM's pickup truck were up 16,9 per cent from the previous year.

Despite Toyota's recall debacle, the Camry finished third overall earning the title of the best-selling passenger car in the States with 327,804 units, posting an 8.1 per cent drop from 2009. The Honda Accord and Toyota Corolla followed in fourth and fifth positions respectively.

Overall, U.S. automakers had four vehicles on the Top 10 list, while Japanese carmakers took six spots. For more details check out the complete list below that includes percentage changes from 2009.


  1. Ford F-Series------------- 528,349 (+27.7%)
  2. Chevrolet Silverado ------370,135 (+16.9 %
  3. Toyota Camry ------------327,804 (-8.1 %)
  4. Honda Accord-------------282,530 (-1.7 %)
  5. Toyota Corolla------------ 266,082 (-10.4 %)
  6. Honda Civic---------------260,218 (+0.2 %)
  7. Nissan Altima-------------229,263 (+12.6 %)
  8. Ford Fusion---------------219,219 (+21.3 %)
  9. Honda CR-V-------------- 203,714 (+6.5 %)
  10. Dodge Ram-------------- 199,652 (+12.6 %)


Dodge Charger, 1968

Dodge Charger, 1968

There have been a number of vehicles bearing the Charger nameplate, but the name has generally denoted a performance model in the Dodge range. The 1966 to 1974 Chargers were the high performance B-body models. The 1975 to 1978 Chargers were based on the Chrysler Cordoba.

1968
It was clear after the sales drop of the 1967 Charger that a restyle was in order. Dodge was going to restyle their entire B-body lineup for 1968 and decided that it was time to separate the Coronet and Charger models even further. What designer Richard Sias came up with was a double-diamond design that would later be referred to as "coke-bottle" styling. From the side profile the curves around the front fenders and rear quarter panels look almost like a Coke bottle. On the roof a "flying buttress" was added to give the rear window area a look similar to that of the 1966 Pontiac GTO. The Charger retained its full-length hidden headlight grille, but the fully rotating electric headlights had been replaced by a simple vacuum operated cover, similar to the Camaro RS. The full length taillights were gone as well. Instead, dual Corvette-inspired taillights were added. Dual scallops were added to the doors and hood to help accent the new swoopy lines. Inside, the interior shared almost nothing with its first generation brothers. The four bucket seats were gone, the console remained the same as the '67. The tachometer was now optional instead of standard, the trunk and grille medallions were gone, the carpeting in the trunk area was gone, replaced by a vinyl mat, the rear seats did not fold forward and the space-age looking electroluminescent gauges disappeared in favor of a more conventional looking design.

In order to further boost the Charger's muscle car image, a new high-performance package was added, the R/T. This stood for "Road and Track" and would be the high performance badge that would establish Dodge's performance image. Only the high performance cars were allowed to use the R/T badge. The R/T came standard with the previous year's 440 "Magnum". The Slant Six was added to the option list in 1968, but it proved to be a very poor seller. Most people wanted a V8 in their Charger. The rest of the engine lineup (318-2, 383-2, 383-4, 426-8) remained unchanged.

In 1968 Chrysler Corporation unveiled a new ad campaign featuring a Bee with an engine on its back. These cars were called the "Scat Pack". The Coronet R/T, Super Bee, Dart GTS and Charger R/T received bumble-bee stripes (two thin stripes framing two thick stripes). The stripes were standard on the R/Ts and came in red, white or black. They also could be deleted at no cost. These changes and the new Charger bodystyle proved to be very popular with the public and helped to sell 96,100 Chargers, including over 17,000 Charger R/Ts.

A famous Charger was the four-speed, triple-black 1968 Charger R/T used in the movie Bullitt. The chase scene between Steve McQueen's fastback Mustang GT and the hitmen's Charger R/T is popularly regarded as one of the greatest car chase scenes ever filmed.

Dodge Charger, 1966

Dodge Charger, 1966

There have been a number of vehicles bearing the Charger nameplate, but the name has generally denoted a performance model in the Dodge range. The 1966 to 1974 Chargers were the high performance B-body models. The 1975 to 1978 Chargers were based on the Chrysler Cordoba.

1966
Carl "CAM'" Cameron would be the exterior designer of Dodge's new flagship vehicle, and on January 1, 1966, viewers of the Rose Bowl were first introduced to the new "Leader of the Dodge Rebellion", the 1966 Charger. The Charger's introduction coincided with the introduction of the new street version of the 426 Hemi. Finally, Dodge would have the performance image to go along with this performance engine.

As the 1966 Charger's features would go, the "electric shaver" grille used fully rotating headlights that when opened or closed made the grille look like one-piece. Inside, the Charger used four individual bucket seats with a full length console from front to rear. The rear seats and console pad also folded forward, and the trunk divider dropped back, which allowed for lots of cargo room inside. Many other things were exclusive to the Charger such as the door panels, courtesy lights and the instrument panel.

The instrument panel was especially interesting as regular bulbs weren't used to light the gauges. Instead four electroluminescent dash pods housed the tachometer, speedometer, alternator, fuel and tempature gauges. In the rear the full length taillight read CHARGER.

The engine selection was all V8s. A six cylinder engine didn't make the option list until 1968. In 1966 four engines were offered; the base-model 318 in³ 2-barrel V8, the truck-sourced 361 in³ 2-barrel, the 383 4-barrel, and the new 426 Street Hemi. The majority of 1966 Chargers were ordered with the 325-hp 383.

Total production in 1966 came to 37,344 units, which was successful for the mid-year introduction.

In 1966 Dodge took the Charger into NASCAR in hopes that the fastback would make their car a winner on the high-banks. But the car proved to have rear end lift around corners which made it very slippery on the faster tracks. The lift was because the air actually travelled faster over the top of the car than under it, causing the car to act like a giant airplane wing. Drivers would later claim that "it was like driving on ice." In order to solve this problem Dodge installed in a small lip spoiler on the trunk lid which improved traction at speeds above 150 mph. They also had to make it a dealer-installed option in late 1966 and through 1967 because of NASCAR rules (with small quarter panel extensions in 1967). The 1966 Charger was the first US production vehicle to have a spoiler. David Pearson, driving a #6 Cotten Owens-prepared Charger, went on to win the NASCAR Grand National championship in 1966 with 14 first-place finishes.

Tuesday, January 4, 2011

1964 Dodge Hemi Charger Concept Car Hits the Auction Block, Again


You are looking at the first Dodge ever to use the Charger nameplate, the 1964 Dodge Hemi Charger Concept Car. Developed in late 1963 on Polara underpinnings, it was used by Chrysler to showcase its newest engine at the time, the now iconic 426-cubic inch (7.0-liter) Hemi V8.

Owned by several collectors over its 47-year existence, this rare piece of automotive heritage is going to be auctioned off at this year’s Automobiles of Arizona event held at Arizona Biltmore Resort & Spa, on January 20. RM Auctions hasn’t released an official estimate yet, but last time it changed hands in 2007, it fetched US $1.1 million.

Currently found on the late John M. O’Quinn’s estate, the 1964 concept car has been completely restored by multiple award-winner Fran Roxas and it has one of the original 15 race Hemi engines, rated at 600+ horsepower.

According to the spec sheet, the first Charger also comes with a 3-speed automatic transmission, independent torsion bar front and rear semi-elliptic leaf spring suspension, 4.56:1 “Sure Grip” rear axle and four-wheel hydraulic drum brakes.

Looking at the photos it’s clear that the car is in pristine condition – it has been kept in climate-controlled storage – and I, for one, would definitely prefer to buy this gem over a modern vehicle costing the same amount of money.

By Csaba Daradics

Source / Photos: RM Auctions


_______________________________GALLERY_______________________________